BCI Unloader Knee Brace for Meniscus Tear, Arthritis Unloader Knee Brace

• For uni-compartment OsteoArthritis OA patients

• Mild to moderate OsteoArthritis OA knee users

• Rheumatoid arthritis knee users

• L1843 L1851 
• Sing up for PDAC approval letter

• Sign up for manual

• Step-by-step video of BCI Unloader Knee Brace

The transaction shall show in the category of medical expense with your FSA/HSA card.

If you use an active FSA/HSA card, your purchase will be auto-substantiated and you can skip the claims process. Note that not all FSA/HSAs are created equal; always check with your FSA/HSA administrator about plan allowances and requirements before you shop.

1. How does the 3-point leverage system relieve bone-on-bone knee pain?

Answer: The brace applies a corrective force at the knee hinge, counteracted by straps above and below the joint. This shifts weight away from the damaged compartment, effectively reducing bone-on-bone friction and meniscus pressure.

2. Can I adjust the range of motion (ROM) on this unloader brace?

Answer: Yes. The integrated ROM hinge includes plug-in stops that allow you to limit extension (0°–40°) and flexion (45°–90°), providing customized protection and stability throughout different stages of your meniscus or OA recovery.

3. Is the BCI Unloader Knee Brace suitable for both medial and lateral pain?

Answer: Absolutely. The brace features a valgus and varus angle adjustment design, allowing it to be configured for either medial (inside) or lateral (outside) compartment unloading to provide targeted pain relief where you need it most.

Most knee braces support your knee — but they don’t reduce joint pressure.

An unloader knee brace works differently:

• Applies 3-point leverage
• Shifts weight away from damaged cartilage/meniscus
• Reduces bone-on-bone contact
• Improves walking comfort

👉 Result: less pressure = less pain

📊 Comparison Table

Feature	Hinged Knee Brace	Unloader Knee Brace (BCI)
Stability	✔	✔
Reduces joint pressure	❌	✔
Helps meniscus tear pain	⚠ Limited	✔
Alignment correction	❌	✔
Best for one-sided pain	❌	✔

Proper knee brace care helps maintain comfort, hygiene, and the intended function of your orthopedic support. BCI Orthopedic Braces recommends checking your brace's fit, straps, grippers, and material condition regularly, especially when wearing it during walking, work, or daily activities.

Why Is My Knee Brace Slipping or Sliding Down?

Knee braces may slip because of incorrect sizing, loose straps, movement, perspiration, skin oils, or worn gripping materials.

To troubleshoot:

• Check the fit: Confirm that your thigh and calf measurements match the product-specific sizing chart.

• Check positioning: Align the brace correctly around the knee joint according to its fitting instructions.

• Inspect the straps: Adjust them evenly without overtightening.

• Clean the grippers: If your brace has silicone gripping bands, gently remove accumulated oils and residue using a cleaning method approved for that product.

• Allow complete drying: Ensure the brace and gripping surfaces are dry before wearing.

If the brace continues slipping, recheck the sizing, strap condition, and adjustment instructions. Persistent slipping may indicate that the brace's size or design is unsuitable.

How Do I Restore Grip to Silicone Knee Brace Bands?

Body oils, perspiration, and moisturizers can accumulate on silicone gripping surfaces and reduce friction.

• Gently wipe the silicone grippers using the manufacturer's recommended cleaning method.

• Use mild soap and water only when permitted by the product's care instructions.

• Avoid rubbing alcohol, bleach, harsh solvents, or abrasive cleaning unless explicitly approved for the specific material.

• Allow the gripping surfaces to dry completely before use.

Cleaning may improve grip when residue is the cause. It cannot reliably restore silicone that has deteriorated, stretched, or worn out.

What Should I Do if My Knee Brace Velcro Straps Stop Sticking?

Hook-and-loop fasteners may lose holding strength when lint, hair, and fabric debris accumulate.

• Remove visible lint from the hook surfaces using a soft, dry brush.

• Inspect the hook-and-loop material for fraying, damage, or worn areas.

• Refasten the straps and check whether they remain secure during gentle movement.

• Replace damaged straps or contact BCI for product-specific guidance when cleaning does not resolve the problem.

Avoid aggressive scraping or pulling that could damage the fasteners.

How Should I Clean and Dry My Knee Brace?

Always follow the care label and instructions provided with your specific BCI knee brace.

• Remove detachable components only when the product instructions permit.

• Use the approved cleaning method for the brace's fabric, straps, padding, hinges, and gripping surfaces.

• Avoid machine washing, tumble drying, bleach, or direct heat unless specifically permitted.

• Allow the brace to dry completely before wearing or storing.

• Inspect the brace for damaged straps, loose components, or material deterioration.

When Should I Stop Wearing My Knee Brace and Check the Fit?

Remove the brace and reassess its fit if you experience persistent pinching, numbness, tingling, skin irritation, excessive pressure, or repeated slipping.

Seek professional guidance if symptoms persist, the brace cannot be positioned securely, or your support requirements have changed. Seek urgent medical assessment for severe pain, new circulation problems, or sudden significant swelling.

BCI Orthopedic Braces Fit Guidance: Correct sizing, appropriate adjustment, regular inspection, and product-specific care are essential parts of orthopedic brace selection and use. A knee brace should support your treatment goals without creating avoidable pressure or restricting circulation.